When a child is born, every parent places the brightest hopes on him and hopes to raise him into a harmoniously developed personality. You can teach him music, take him to various sports clubs. However, it has been proven that a person cannot grow up with a truly diverse outlook if he is not given a pencil in his hands from an early age.
In addition, owning felt-tip pens or pencils helps the baby develop fine motor skills. Drawings allow him to show his family how he sees and feels the world around him. All children love to draw, only boys and girls prefer to depict completely different things. So, if a little artist will most likely draw flowers, the sun or other positive things, then boys will most often prefer to depict cars, explosions, and military equipment. Young children, as a rule, cope with their art on their own, but older children often ask their parents to help them draw this or that picture, setting the bar higher. Today we would like to help children and their parents and tell in detail how heavy military equipment is drawn step by step, in particular, how to draw a tank.
How to draw a T 34 tank
The easiest way to draw the T 34 (the most popular and famous tank of the Great Patriotic War) is to use the method of depicting it step by step. This means that individual details will be depicted on a sheet of white paper, which in the end will be combined into an overall correct drawing.
Generally speaking, you will have to draw simple geometric shapes (rectangles, ovals, squares, triangles, circles). In the future, you will only need to slightly modify the main contours of the tank: where necessary, erase the corners with an eraser, if you need to finish drawing some specific things. Looking ahead, let's say that many small details are applied to an almost finished drawing.
We especially focus on this point: it is very important not to put pressure on the pencil while drawing the primary contours. The child must understand that the outlines of the drawing must be thin so that they can be easily erased with an eraser and new lines can be drawn. We declare with confidence that if you or your child follows our instructions exactly, then it is quite possible that you will be able to recognize the tank in the drawing.
How to draw a tank step by step
So, how to draw a tank with a pencil step by step? You should know that small details are not so important for children; it is enough that the general contours and large protruding parts remind him of the famous car. In order to learn how to draw a tank correctly, you need to do the following.
- In the center of the sheet, in its lower part, draw a large rectangle and draw two small triangles to the left and right of it.
- The outer edges of the triangle should be slightly rounded, and the extra lines should be erased. Thus, we have drawn the contours of the future chassis of the tank (caterpillar).
- The next step shows that inside the depicted structure you need to draw the same lines, repeating the previous contours, only smaller in size.
- Drawing several circles inside the second (smaller rectangle) will complete the process of depicting the tank caterpillar. At this stage it is important to carefully erase all unnecessary lines. An adult should definitely help the child, since at an early age children’s motor skills are imperfect, and due to inexperience the boy runs the risk of erasing the necessary lines.
- We draw the contours of the tank's armor. To do this, draw a thin rectangle above the caterpillars, not extending beyond the contours of the caterpillar.
- A small semicircle should be drawn above the armor; it will represent the observation tower of the tank. Please note that the semicircle (turret of the T34 tank) has some features. The height of the tower should be slightly greater than the height of the armor, and its edges should not protrude beyond the contours of the armor. Moreover, it (the dome) should be a couple of centimeters on each side from the edge of the protective part of the tank.
Next, all that remains is to depict a real cannon on the “imperishable”. Here it is enough to draw one thin and long rectangle to the tower. But in order for it to be as similar as possible to a cannon, one of its edges should be rounded. For authenticity, you can add a flame arrester to the end of the gun. This is done extremely simply: a small square is drawn at some distance from the outer edge of the gun. When the drawing is ready, it will need to be given color. Leave the choice of colors to the child himself, this will give the feeling that the entire drawing was made by the child himself. You can decorate the image of a real combat vehicle with a big red star. Actually, this is all the instructions, following which you can draw a tank.
How to draw a tank: other ways
Today at Soyuzpechat kiosks you can buy a lot of coloring books designed for children of different ages. Believe me, the child will be interested in connecting the dots that follow the contours of the combat vehicle and then coloring them. This method is somewhat simplified and frees parents from additional hassle, but allows the baby to demonstrate his abilities independently.
You can redraw the image of the tank using carbon paper. This activity will give the child confidence in his abilities, because he will be able to draw an exact copy of the picture on which the tank is drawn.
There is another option. You can take a picture showing a combat vehicle and draw it into equal squares. Then do the same on a blank sheet of paper. Next, we redraw the images in each square onto the piece of paper. This technique assumes that the child’s “co-author” must have at least minimal drawing skills. At worst, you can go online and find samples with videos that explain the technology of drawing tanks step by step. We are sure that everything will work out for you!
Hello friends, in this lesson we will draw the legendary Soviet T-34 tank. And this is not PR for the film; by the way, I haven’t watched it yet, although I’ve only heard good reviews. The fact is that any man from kindergarten age should be able to draw a tank. In fact, I wanted to make a simple lesson that even children could learn, but it turned out a little more complicated than I thought.
In this sped-up video I draw a tank in Photoshop.
If you understand the principle of construction, then you can easily draw it with a pencil and ruler.
We draw the T-34 tank step by step
First of all, as usual, we outline the approximate proportions of the object, in the future it will be possible to adjust them, there is nothing wrong with that. Draw the tank body with thin lines.
A tank differs from a tank of another model in volume, relation of parts to each other and some characteristic features. At the first stage, our task will be to convey the most similar character. If you are drawing a specific tank, then be sure to use a layout or photographs from different angles.
The tank needs wheels, let's draw them too.
We outline the falling shadows that will add volume to our object.
Let's paint the tank body in the required color.
Let's add halftones and add details to the tank.
I decided to stop at this stage, the fact is that the process can be continued endlessly, clarifying and clarifying the details, do it as you wish.
If you liked the lesson, like and subscribe to my blog to be the first to receive new materials.
The master classes presented in this collection will tell everyone how to draw a military tank step by step with a simple pencil. Descriptions of the work are given for such well-known and popular models of armored vehicles as the T-34-85, IS-7 and Tiger. For beginners, there is a simple and accessible step-by-step lesson on drawing a children's tank. On it, the child will be able to learn the basic principles of creating an image, so that later he can easily master more complex tasks.
How to draw a tank for beginners - master class with a pencil step by step for children
A simple and accessible children's master class will tell you how to draw with your own pencil one of the most popular types of military equipment - a real tracked tank. Of course, in this case the image looks rather conventional, but children of kindergarten age simply cannot cope with a more serious design. But you will definitely be able to practice a little and, as they say, get better at this easy lesson. It is better to exclude the use of compasses for the younger and middle groups. Let 2-4 year olds draw circles on the caterpillars by hand or trace pre-prepared templates. But no one will get hurt himself or cause accidental bodily harm to his comrades.
Necessary materials for a children's step-by-step pencil drawing master class
- paper
- simple pencil HB
- eraser
- ruler
- compass (or circular template)
Step-by-step instructions on how to draw a tank with a pencil for children
How to draw a T-34-85 tank with a pencil step by step - master class with photos for a child
In general, drawing a Soviet T-34-85 tank, considered a symbol of the great victory in the Great Patriotic War, with a pencil is not difficult. Especially when you have a detailed master class at hand with a description of the entire process and step-by-step photos. However, the work will require time, accuracy, attention and perseverance, since the model has many specific features and characteristic small details.
Necessary materials for the master class on drawing the T-34-85 military tank
- paper
- simple pencil HB
- simple pencil B2
- eraser
Step-by-step instructions on how to easily draw a T-34-85 tank with a pencil
How a child can draw an IS-7 tank with a pencil step by step - master class and video
IS-7 is one of the most popular Russian tank models. Drawing it with a pencil, even relying on the information from a step-by-step master class, will be quite difficult, especially for a child. But if one of the adults (parents, older brother or sister, teacher, etc.) gets involved in the work at the detailing stage, everything will turn out well and the drawing will come out clear, absolutely realistic and fully consistent with the actual parameters of the armored vehicle.
Necessary materials for a step-by-step drawing of the IS-7 tank
- paper
- simple pencil HB
- simple pencil B2
- eraser
Step-by-step instructions for a child for a master class on drawing IS-7
- Make a preliminary sketch on a sheet of paper: an elongated rectangle for future caterpillars, and on top a trapezoidal block for the base.
- Next, draw a tower - a semi-oval of medium length, not reaching the end of the base of the tank.
- Draw two straight horizontal lines from the tower facade. In the future, they will become a gun barrel.
- Take a B2 pencil and carefully draw the caterpillar links along the entire length of the lowest rectangle. Remove excess sketch lines using an eraser.
- Inside the tracked part, draw nine round wheels - seven at the same level and two at the edges slightly higher than all the others. Then carefully draw all the internal parts of the wheels: rims, gears and pins.
- Pay attention to the details located on the hull and turret. On top, near the hatch, depict a vertical submachine gun of a smaller caliber.
- Carefully work out the barrel part: emphasize the place where the gun enters the turret, and at the edge of the barrel make a wider, short nozzle for the projectile to fly out.
- Using an eraser, remove all the extra lines remaining from the preliminary sketch and go along the outer contour of the tank with a B2 pencil to make the armored vehicle look more clear and prominent.
How to easily draw a Tiger tank with a pencil step by step
This lesson explains in detail how to easily draw a Tiger military tank at home. The work is quite painstaking and requires time, attention and accuracy. But the final result certainly compensates for all the costs, since the model turns out to be very realistic and looks exactly like the real thing.
Necessary materials for drawing a Tiger military tank step by step
- paper
- simple pencil HB
- simple pencil B2
- eraser
Step-by-step instructions on how to quickly and easily draw a Tiger tank model with a simple pencil
- First, make a sketch to indicate the parameters of the future tank. Use light straight strokes to mark the outlines of the hull, tracks and turret. Do not round corners.
- Draw the trunk and a wide, powerful barrel. Clarify the outlines of the tracks and work out the body, drawing it in the form of a pair of wide rectangles. Draw the details of the facade and the front part of the left caterpillar larger, and make the rear part somewhat smaller to create the impression of it narrowing into the distance.
- Add notches to the barrel, draw more clearly the movable base located in the turret body. On the tower itself, mark the opening hatch cover.
- Complete the design of the barrel, draw all the components of the barrel and the movable mount. Add thematic details to the outer part of the tank, located on the left under the hatch.
- Outline the details of the front end part, mark the silhouette of the protective plates covering the tracked undercarriage.
- Pay attention to the image of the searchlight, add the machine gun barrel and all the other required details of the front of the tank. Trace the outlines with a B2 pencil so that they come out in front.
- For the wings, clearly draw the border of the front parts of the structure and add straight lines, placing them over the entire area of each wing. Highlight the track wheels and give the track some smoothness.
- Work on the track panels and make flat side edges on them. Work out the wheels, mark the edges and densely shade the area under the wings.
- Apply light and shadow to individual areas of the armored vehicle. After this, the tank will become voluminous and will look almost like a real one.
Drawing a tank with a pencil is not difficult. The main thing here is to be able to highlight the main details and omit unnecessary details. Let's look at how easy it is to draw a T34 tank step by step. Pictures and videos on our website will help you with this.
T-34
1. First we draw the base for the tank. It will be a hexagon, inside of which we draw a horizontal line. It will help to depict caterpillars of the same size. From the caterpillars we draw a pair of trapezoids on the side and in front. This will be the base of the tank.
Stage 1: draw the base of the tank
2. The tank turret is depicted using a rectangle with rounded edges. We draw a cannon from the tower, and lines will connect the tower to the hull.
Stage 2: draw the turret and hull of the tankStage 3: draw the caterpillars
4. Add details in the form of a gas tank, hatch, steps.
Stage 4: adding tank details
5. Divide the tank turret into a couple of parts using a rounded line. Then we draw hoops around the cannon and a hatch.
Stage 5: finishing the tower
6. Add details. We draw the tread on the tracks. Then we begin drawing the inner rim and wheel pins. Near the outer wheels we draw teeth. We shade and shade the wheels.
Stage 6
Drawing the T34 tank:
Tiger
1. Draw the main contours of a tiger tank with a strongly protruding gun.
Stage 1: outline the contours of the Tiger tank
2. We designate the main parts of the tiger tank, the rollers and the barrel, as well as smaller parts.
Stage 2: designate the main parts of the tank
3. Add parts for attachments. We outline the chassis.
Stage 3: finishing the attachments and wheels
4. Shade the tank, tint individual parts, add volume to the tiger tank.
Stage 4: shade the tank
Video instruction
Mouse
Tank Mouse is also easy to draw with a pencil. Here's how to do it step by step.
1. Draw a rectangle with rounded edges. On top we draw a trapezoid – the body of a Mouse tank.
Stage 1: depicting the basics of the tank
2. On top of the hull we draw the turret of the Mouse tank: we draw a trapezoid, rounded on the left side. Nearby we draw another semicircle, and from it - a cannon.
Stage 2: draw the tower, cannon and wheels
3. At the next stage we depict the hatch, tracks and spare tank.
Stage 3: finishing drawing the hatch and tracks
4. At the end, we decorate the Mouse tank with symbols in the form of a cross.
Stage 4: painting the Mouse tank
E100
The e100 tank is somewhat different from the previous one. This is a super heavy tank. Externally, its body looks more massive and robust. To draw an E100 tank with a pencil step by step, follow the following recommendations:
1.Draw a parallelogram and a trapezoid on top. This is the hull and turret of the E100 tank.
2. On the top of the tower we mark the hatch, the cannon hoops and the cannon itself with a thick base.
3. Below, under the parallelogram, draw a semicircle along the entire length - the tracks of the E100 tank.
4. We fit the wheels into a semicircle so that one slightly overlaps the other.
5. We complete the drawing with small details of the tank: hoops and wheel pins.
In the picture you will see a drawing and diagram of the E100 tank. The video on our website will also help you draw it.
1. Draw two rectangles with one common side.
2. Where the body of the IS7 tank will be located, draw a horizontal line and draw the contours of the tracks.
Stage 2: finishing drawing the body of the tank
3. From above, we use a trapezoid to mark the turret of the IS7 tank and the barrel of the gun, and use crosses to mark the places for the wheels.
Stage 3: draw the cannon and wheel locations
4. Draw the track wheels and details on the turret of the IS7 tank.
Stage 4: draw the caterpillar and add details
5. All that remains is to shade and tint individual parts of the tank.
Stage 5
KV1
You can easily draw another model of the tank, KV1, using basic geometric shapes.
1. Draw a parallelepiped – the body of the KV1 tank.
Stage 1: draw a parallelepiped - the body of the tank
2. On the side where the front will be located, draw two vertical lines on the sides and one line diagonally between them. Above we depict the rounded turret of the KV1 tank.
Stage 2: designate the front and round tower
3. Outline the contours of the gun.
Stage 3: outline the contours of the gun
4. We draw the details of the KV1 tank and the tracks, initially outlining where each wheel will be located (they should not overlap each other).
Stage 4: draw the details and the cannon Stage 5: designate the tracks
5. Shade and tint the drawing.
Stage 6: Shading the drawing
KV-1S
In general, of course, the general layout of the tanks will be the same. Thus, knowing how to draw tanks in general, you can vary their models in the pictures. Let's draw a KV1S tank.
1. We draw the same familiar rectangles with a common side.
Stage 1: draw two rectangles
2. Divide them in half with a horizontal line and draw the contours of the caterpillars. At the top we denote the turret of the KV1S tank.
Stage 2: mark the body and outline of the caterpillars 3. Using a line, we define the inside of the caterpillar.
Stage 3: mark the inside of the track
4. We mark the outline of the cannon and the places for the caterpillar wheels.
Good afternoon, our subscribers often write why we don’t publish lessons that tell us how to draw military equipment, and in particular, How to draw a T 34 tank. Moreover, after cars, tanks are the most popular drawing subject for boys.
We correct our mistake and tell you in this lesson. This is a legendary car that made a huge contribution to the victory in the Great Patriotic War and the defeat of the Nazis. We won’t talk much about how good this tank was in its time and how our grandfathers and great-grandfathers drove hordes of Germans to their home. Let's get started.
Step 1
Actually learn does not constitute a special pipe. The tank is a military vehicle and has a square shape, but it’s easier to draw a square. First, let's draw the body of the tank in the shape of a hexagon. Let's draw a line in the center and make two tracks for the caterpillars.
Step 2
Now let's draw a rectangular tank turret with two rounded edges. Then we will draw lines that will connect the tower to the base. Let's add a tank cannon.
Step 3
We draw six wheels and tracks of the tank, which is exactly how many wheels the legendary T-34 had. When completing the lesson How to draw a T 34 tank, you need to pay attention to every little detail, then it will be as realistic as possible and similar to its prototype.
Step 4
Now let's add the gas tank and hatches.
Step 5
Now we need to divide the tank turret into two parts. To do this, draw a curved line around the cannon. Let's add some hoops at the base of the cannon.
Step 7
Let's add shadows and the tank is ready.
